Google Glasses + Flutter Companion Performance

Modern Physical AI systems are distributed pipelines. The goal is not simply higher FPS; it is predictable latency, controlled memory use, reasonable power consumption, and reliable behavior.

Architecture

Sensors / Smart Glasses
        ↓
Kotlin / Flutter
        ↓
Network / Gateway
        ↓
NVIDIA Jetson
        ↓
ROS 2 / Isaac ROS
        ↓
NVIDIA AI Model
        ↓
Planner / Controller

1. Establish a baseline

Before changing code, record:

End-to-end latency
Processing FPS
CPU utilization
GPU utilization
RAM and GPU memory
Network RTT
Dropped frames
Temperature
Power or battery impact

Keep the test scenario identical between benchmark runs.

2. Identify the bottleneck

Measure each stage separately:

Capture → Transfer → Decode → Preprocess → Inference → Postprocess → UI

Optimize the stage contributing the most latency instead of optimizing arbitrary code.

3. Control processing rate

Do not automatically process every sensor event.

private var busy = false

fun onFrame(frame: Frame) {
    if (busy) return
    busy = true

    executor.execute {
        try {
            process(frame)
        } finally {
            busy = false
        }
    }
}

For real-time perception, processing the newest frame can be preferable to accumulating stale frames.

4. Separate workloads

Use different paths for different priorities:

High priority  → robot commands / safety
Medium         → perception / navigation
Low priority   → analytics / logging / cloud upload

A large video upload should never block a safety command.

5. Reduce unnecessary copies

Watch for pipelines such as:

Camera → YUV → RGB → Bitmap → JPEG → Base64

Every conversion can consume CPU, memory, and time. Keep data in an appropriate native representation for as long as possible.

6. Keep queues bounded

An unlimited queue can turn a temporary overload into seconds of stale latency.

Use a small buffer or latest-frame strategy for time-sensitive perception.

7. Profile the target hardware

For Android/Flutter, profile release/profile builds with the platform's performance tools. For Jetson, measure CPU, GPU, memory, temperature, and sustained behavior under the complete robotics workload.

8. Validate sustained performance

A 30-second benchmark can hide thermal throttling or memory pressure. Run longer tests and record the performance curve.

9. Test failure conditions

Include:

Weak network
Disconnected device
High CPU load
GPU memory pressure
Low battery
Thermal throttling
Robot safety stop
Cloud unavailable

The system should degrade gracefully.

10. Create a benchmark table

Version | FPS | Latency | RAM | GPU | Temp
--------|-----|---------|-----|-----|-----
Before  | 20  | 120 ms  | 2GB | 55% | 58C
After   | 28  | 75 ms   | 1.7GB | 61% | 60C

Use your actual measurements rather than relying on synthetic numbers.

11. Apply domain-specific optimization

This tutorial focuses specifically on Flutter isolates, platform channels, native camera/video processing, rebuild reduction..

Recommended optimization sequence:

Measure the current pipeline.
Remove unnecessary work.
Reduce data movement.
Bound queues.
Move expensive work away from UI/control threads.
Use hardware acceleration where supported.
Re-measure accuracy and latency.
Run a sustained test.
Test failure behavior.
Document the improvement.

12. Protect the physical control loop

AI models should normally produce validated perception, plans, or intents. Deterministic safety and control layers should remain responsible for enforcing physical constraints.

AI output
   ↓
Validation
   ↓
Safety constraints
   ↓
Controller
   ↓
Actuators

Conclusion

Performance optimization across smart glasses, Flutter, Kotlin, NVIDIA Jetson, ROS 2, and Physical AI requires an end-to-end measurement strategy. Optimize latency, memory, bandwidth, GPU utilization, thermals, and reliability together rather than chasing a single benchmark number.