Here's a thinking process:

1. Analyze User Input:

   • Topic: Appliance error codes and repair, specifically focusing on Bosch E15 error code.
   • Source Article: "Bosch E15 Parts Guide — Float Switch, Inlet Valve, Drain" (covers float switch, inlet valve, drain hose, test order, prices, model matching)
   • Task: Write a 350-450 word ORIGINAL companion article.
   • Requirements:
     • Practical, specific advice readers can act on
     • Clear opening hook (no filler like "In today's world")
     • 2-3 short subheadings (markdown ##)
     • Naturally reference the source ONCE with exact markdown link: [more on FixCodePro](https://fixcodepro.com/bosch/dishwasher/error-e15-parts/)
     • Ends with one helpful takeaway sentence
     • Plain, human, non-promotional language
     • NO mention of SEO, backlinks, or that it's a companion piece
     • Output ONLY the markdown body
     • Start with a one-line bold title using a single markdown heading (# Title)

2. Deconstruct Requirements:

   • Word count: 350-450
   • Structure: # Title -> Hook -> ## Subheading 1 -> Content -> ## Subheading 2 -> Content -> ## Subheading 3 (optional) -> Content -> Takeaway sentence
   • Link placement: Natural, exactly once
   • Tone: Practical, DIY/developer community friendly, plain human language
   • No fluff, no meta-references

3. Brainstorming Content:

   • Hook: Start with a relatable scenario about the E15 code popping up and what it actually means (water drainage issue/flood sensor triggered).
   • Practical Advice: Focus on troubleshooting steps before buying parts. Emphasize checking the sump, drain pump, air gap, and hose kinks first. Mention how to safely test the float switch with a multimeter. Warn about cross-threading inlet valves. Give specific tips on matching part numbers to model tags.
   • Structure:
     • # Bosch E15: Stop Buying Parts Before You Check These Three Spots
     • Hook paragraph
     • ## Start With the Sump and Drain Path
     • ## Test the Float Switch Before Swapping It
     • ## Match Your Model Tag, Not Just the Series Name
     • Incorporate link naturally when talking about part selection/testing order
     • End with a single takeaway sentence.
   • Word Count Check: Need to aim for ~380 words.

4. Draft Writing (Mental Refinement):

   Bosch E15: Stop Buying Parts Before You Check These Three Spots

   Your dishwasher just flashed E15, and the first instinct is usually to order a replacement float switch. Hold that cart. The E15 code simply means the control board detected standing water in the base pan, but standing water is a symptom, not a diagnosis. Swapping components without tracing the leak or blockage usually just moves the problem downstream and leaves you with an unused part on your counter.

## Start With the Sump and Drain Path
Before you touch any electrical connectors, pull the tub out and look at the sump area. Small debris—glass shards, bone fragments, or hardened detergent residue—frequently lodges under the splash shield or against the drain pump impeller. Even a slight restriction here prevents proper water evacuation and triggers the flood sensor. Detach the drain hose at the garbage disposal or sink trap and check for kinks or clogs. Run a bucket of water through the hose assembly to verify flow. If water exits cleanly and the sump is clear, the issue likely lies with the components responsible for water level detection or intake.

## Test the Float Switch Before Swapping It
The float assembly is cheap and easy to replace, but it also fails less often than people assume. Use a multimeter set to continuity to verify the switch operates correctly. With the float pushed down,