Here's a thinking process:

1. Analyze User Input:

   • Topic: Appliance error codes and repair (specifically Bosch Dishwasher E09)
   • Source Article: "Bosch Dishwasher E09 Error — Heating Element & Sensor Fix" (Summary provided)
   • Requirements:
     • 350-450 words
     • Original, adds value beyond the source
     • Practical, specific advice
     • Clear opening hook (no filler)
     • 2-3 short subheadings (markdown ##)
     • Naturally reference source ONCE with exact markdown link: [the original source](https://fixcodepro.com/bosch/dishwasher/error-e09/)
     • End with one helpful takeaway sentence
     • Plain, human, non-promotional language
     • NO mention of SEO, backlinks, or being a companion piece
     • Output ONLY markdown body
     • Start with a one-line bold title using single markdown heading (# Title)

2. Deconstruct Requirements & Plan Structure:

   • Title: # Why Your Bosch Dishwasher Keeps Flashing E09 (And What Actually Fixes It)
   • Hook: Direct, practical, no fluff. Something like: "An E09 code doesn’t just mean your dishwasher is broken—it means the machine thinks it can’t reach cooking temperature, and that’s usually a wiring or calibration issue, not a dead heater."
   • Subheading 1: ## Check the Easy Stuff Before You Swap Parts
   • Content 1: Practical steps: power cycle, check water inlet temp, verify cycle selection, look for tripped GFCI, check for clogged filter affecting water flow/heat distribution. Emphasize that E09 is often a sensor reading mismatch, not always a blown element.
   • Subheading 2: ## When to Test Voltage and Resistance
   • Content 2: Specific advice on using a multimeter, where to probe, what readings mean (heater ~10-30 ohms, sensor ~10-15k ohms at room temp), safety warning about unplugging, checking harness connections for corrosion/cracks. Reference the source naturally here.
   • Subheading 3: ## The Reset That Actually Works
   • Content 3: Explain the proper reset sequence for Bosch (cancel button, hold 3-5 sec, power cycle), why it matters for control board memory, when to call a pro (control board failure vs. sensor/element).
   • Takeaway: One sentence ending with practical advice.
   • Word count: Aim for 350-450. I'll count carefully.

3. Draft Writing (Mental Refinement):

   Why Your Bosch Dishwasher Keeps Flashing E09 (And What Actually Fixes It)

An E09 code doesn’t just mean your dishwasher is broken—it means the control board thinks the water isn’t reaching the required temperature within the allotted time. Before you order a replacement heating element, know that this fault is frequently triggered by a dirty filter, a tripped safety switch, or a control board that simply needs a proper reset.

## Check the Easy Stuff Before You Swap Parts

Bosch machines use a water inlet sensor to verify that hot water is actually entering the tub. If you run a heavy wash on cold tap water, the E09 will trigger every time. Switch to the hottest setting on your water heater (120°F is ideal) and run a quick rinse cycle. Next, pull out the bottom rack and inspect the coarse filter under the spray arm. A layer of ground glass or food debris restricts water circulation, which starves the heating chamber and fools the sensor. Rinse the filter under warm water, wipe the housing with a soft brush, and reinstall it flush. Don’t forget to check the electrical outlet’s GFCI; a momentary power dip during the heating phase can corrupt the control board’s temperature log and throw a false code.

## When to Test Voltage and Resistance

If the basics don’t clear the fault, you’ll need a multimeter. Unplug the dishwasher at the breaker, remove the lower