I spent way too long remastering the intro of Imperium Galactica 2 – Solarian, a space-strategy game from 2000, to a clean 1080p using AI. Along the way I learned a pile of things the hard way — about SeedVR2, about temporal flicker, about running diffusion on a tiny AMD iGPU, and about how little the "big model" actually matters. This is the whole journey, dead ends included, so you don't have to repeat my mistakes.
Everything (code + the generic pipeline) is here: https://github.com/andyskw/ig2-solarian-seedvr2-remaster
▶ Watch the full remaster: English · Hungarian dub · side-by-side 50/50 comparison
Lesson 0: the source matters more than the upscaler
I had two copies of the same intro: a 360p one (the language dub I wanted) and a 1080p one (a different dub). The 1080p "looked the same" at a glance — but it isn't. A quick sharpness measurement (Laplacian variance) plus zoomed crops showed it carries genuinely more detail (8.7× the bitrate).
So the single biggest quality jump came from throwing away my preferred 360p source, upscaling the better 1080p one, and muxing the audio I wanted back at the very end. Picture and audio are separable.
If you take one thing from this post: feed your upscaler the best source you can find.
Getting AI to run on a tiny AMD iGPU
My always-on box has an AMD Radeon 890M iGPU (gfx1150) — no ROCm userspace installed, just the kernel driver. It still works, with two non-obvious tricks:
# self-contained ROCm wheel — no system ROCm needed
pip install --index-url https://rocm.nightlies.amd.com/v2/gfx1151/ torch torchaudio torchvision
export HSA_OVERRIDE_GFX_VERSION=11.5.1 # 11.0.0 -> hipErrorInvalidImage; unset -> GPU invisible
export MIOPEN_FIND_MODE=2 # else MIOpen hangs FOREVER on the first VAE conv
That MIOpen hang cost me ~27 minutes of staring at a GPU pinned at 100% with zero progress before I figured out the FAST find-mode. If you run SeedVR2 (or anything MIOpen-heavy) on a Strix-class iGPU, remember those two lines. :D
SeedVR2, and why the model size barely matters
SeedVR2 gave the most natural result (real surface texture, temporal awareness). I compared 3B vs 7B and... they took almost the same time. Why?
The fp16 VAE decode is the bottleneck, not the diffusion transformer. Quantizing or shrinking the DiT changes runtime by a rounding error. The 3B-FP8 looked to me more natural, so that's what I used.
The flicker hunt: it's latent_noise, not batch_size
The intro contains a lot of space fight scenes.
Small, fast-moving objects (a little fighter, drifting shadows) flickered — the model re-invents their detail every frame (however, after carefully watching, the original scenes also had a similar flickering -> upscaling only made them more visible). The intuitive fix is a bigger temporal batch... and it helps, then plateaus.
The thing that actually worked was latent_noise_scale: low on faces (to keep detail), higher on fast motion (to suppress the per-frame re-hallucination). Things that did not work: a temporal
deflicker filter (not motion-compensated) and RIFE frame interpolation (smooth, but the flicker is baked into the generated frames — and 60 fps made me slightly motion-sick).
Here's the worst offender — the little fighter in the opening space battle (~0:58 in the video).
Left = original, right = remaster:
Oh, and on low/shared-VRAM GPUs a big batch will OOM the VAE decode — --vae_decode_tiled fixes that.
Scene-by-scene, with a human in the loop
For the best result you process per shot: split at every cut, run one batch per shot, and tune
latent_noise per shot by content (faces ~0.05, fast action ~0.15, tiny fast objects ~0.20). But
getting the cut list was the real fight:
- ffmpeg's scene filter missed cuts between visually-similar space shots and over-segmented explosions. A "72-second shot" was actually ~5 shots.
- PySceneDetect's AdaptiveDetector, calibrated against a few hand-marked cuts, did much better.
- The opening "cut" was a 1-second cross-dissolve — invisible to content detectors; only my eye caught it.
The workflow that worked: auto-detect → render a contact sheet (one thumbnail per shot) → verify and hand-edit. Treat automatic scene detection as a "draft".
The bulk of the hand-editing was merging false cuts. The rule I settled on: it's the same shot if the camera/subject continues across the "cut" (an explosion flash, fast motion, a fighter crossing frame);
it's only a new shot on a real change of framing — or a dissolve, which detectors miss entirely.
One more trap: split frame-exactly. Time-based -ss/-to added ~1 frame per cut, which drifted ~2 seconds over the video and broke lip-sync. trim=start_frame:end_frame gives the exact source frame count. This can save tons of time, and if you catch it only after the whole video is rendered, you will be really pissed off. :)
By the numbers: a 5-second proving ground
Here's the thing — I didn't discover any of the above on the full 3.5-minute intro. Every decision was made on a single 5-second clip, looped through the pipeline over and over on the iGPU. Source choice, 3B vs 7B, fp8 vs Q4 vs fp16, batch 5 → 25 → 49 → 73, tiling on/off, latent_noise 0 → 0.1 → 0.15, plus the deflicker and RIFE dead ends — roughly a dozen full SeedVR2 runs on that one clip (two of which OOM'd and had to be killed), adding up to ~16 hours of iGPU compute just to dial in the recipe.
Out of all that came ~15 side-by-side comparison reels — and the genuinely fun part was watching the same five seconds run 2, 3, even 4 ways at once:
Iterating on a short clip first is the whole trick: cheap enough to be patient, long enough to judge temporal behavior. Only once those 5 seconds looked right did I commit a single minute to the full render.
Hardware reality: iGPU days vs cloud hours
On the 890M iGPU the full run extrapolated to ~74 hours (~40 s/frame). So I rented an RTX PRO 6000 (Blackwell, 96 GB) on vast.ai for ~$1.1/hour:
- Blackwell (sm_120) needs CUDA 12.8 torch (PyTorch 2.12 / cuDNN 9.2).
- Encode dropped from ~12 minutes/batch to ~28 seconds/batch. With 96 GB: no tiling, whole-shot batches.
- The whole 3.5-minute intro: 2h 21m, about $2.70.
A few cloud gotchas that ate my time: pkill -f inference_cli.py matched its own command line and killed my shell; moving "just the home folder" to a new box left the Python deps behind; and the rented box's stale CA bundle made curl reject valid certs (certificate has expired).
Here's what that full render buys you on a wide shot — the same 50/50 split, remaster on the left:
Prefer to scrub through it yourself? Here's the full 50/50 split, start to finish:
https://www.youtube.com/watch?v=7zh0KB110sE
Finishing + a YouTube tip
Mux the audio onto the silent master (-c:v copy); the frame-exact split keeps it in sync. And when you upload, upscale to 4K first. YouTube assigns bitrate by resolution tier, so a 4K upload preserves your 1080p content far better through its re-encode than a native 1080p upload.
The recipe (use the repo)
- Pick the best-quality source; keep audio separate.
- Detect shots → verify by hand (contact sheet); watch for dissolves.
- Frame-exact split → per-shot SeedVR2 (3B-FP8) with per-shot
latent_noise, batch = shot length. - Low-VRAM?
--vae_decode_tiled. Big cloud GPU? whole-shot batches. - Concat → mux audio → upload at 4K.
The generic, resume-safe pipeline (CUDA and AMD ROCm), the shot detector, and the full writeup are all here:
👉 https://github.com/andyskw/ig2-solarian-seedvr2-remaster
Credits: SeedVR2 (ByteDance Seed · NumZ · AInVFX), PySceneDetect.
