Run no-cycle on your full monorepo, then run it again on a known-complex subdirectory. If the subset finds more cycles than the full run — you have the same class of bug we had.
We found 5 import-graph cycles in 33 files that were invisible in 14,556 — next.js, 131K stars. The cause: a 10-hop depth limit that wrote false "non-cyclic" entries into a shared cache, poisoning later traversals. Large scope → more files processed before the subset → more false cache entries → more cycles hidden. Small scope → clean cache → same cycles visible.
The cache bug is confirmed in source; the fix is in eslint-plugin-import-next@2.3.6. The detected cycles are mixed-edge: one direction is a value import, the other is import type. eslint-plugin-import/no-cycle v2.32.0 skips import type edges by design (importer.importKind === 'type' check, line 93 of no-cycle.js), which is why its count differs from ours — different edge-counting policies, not a bug in either tool.
The bug: a 10-hop depth limit that silenced 12-hop cycles — and poisoned the cache
The original default in import-next/no-cycle was maxDepth: 10.
Next.js's webpack-config.ts has an import cycle approximately 12 hops deep. With maxDepth: 10, the DFS reaches hop 10, stops, marks those boundary files as explored, and exits without finding the cycle. The closing import — the one that would have revealed it — is never reached.
// What happens at maxDepth: 10
// A → B → C → D → E → F → G → H → I → J → [depth exceeded — stop]
// K → L → A ← never reached
//
// Result: 0 cycles. The A→…→L→A cycle disappears.
The failure is invisible. The rule runs, reports no violations, exits 0. No warning that it stopped early. No indication that part of the graph wasn't examined.
Two-part fix, in order of importance:
Fix 1 (the real bug): only cache a node as "acyclic" when the DFS was complete. The depth cap itself isn't wrong — it's a legitimate performance escape hatch. What's wrong is marking a depth-truncated node as unconditionally acyclic. From the source:
// Only cache as non-cyclic when the DFS was complete AND found no cycles.
// A depth-truncated DFS cannot prove acyclicity (the cycle may exist past
// the depth limit), and caching it poisons every future lint pass that
// traverses the same subtree.
if (allCycles.length === 0 && !depthLimitHit) {
cache.nonCyclicFiles.add(targetFile);
}
This means: if you use a finite maxDepth after the fix, cycles deeper than your limit still won't be detected — but they also won't poison the cache for other traversals. The scope-dependent failure mode is gone.
Fix 2 (the default): raise maxDepth to Number.MAX_SAFE_INTEGER. The 10-hop default silenced the 12-hop webpack-config.ts cycle entirely. The new default matches eslint-plugin-import v2.32.0 (Infinity). oxlint v1.65.0 ships import/no-cycle under --import-plugin and traverses without an explicit depth cap.
On stack safety: The DFS is recursive. Recursion depth is bounded by the traversal path length — which on a dense 14K-file graph can reach hundreds of frames before hitting a leaf or cycle, well short of V8's ~10K-frame limit in practice. For very dense dependency graphs (generated code, large barrel-file trees), a finite maxDepth is a legitimate performance and stack-safety guard. Fix 1 ensures that finite cap no longer poisons the cache — you get a depth-limited result without false negatives cascading to other traversals.
What the fix changes in eslint-plugin-import-next@2.3.6: The ~12-hop cycle in webpack-config.ts is now caught. The 33-file router-reducer subset returns 5 cycles whether run in isolation or as part of the full 14,556-file repo. The gap that produced 0 on the full run is closed. Whether the fixed rule finds all 17 cycles oxlint reports is tracked via our ground-truth corpus.
eslint-plugin-import/no-cycle already defaults to maxDepth: Infinity, so Fix 2 doesn't explain their 0 either. The explanation is their edge-counting policy: the rule explicitly skips import type edges (importer.importKind === 'type' check in the source). The detected cycles contain at least one import type edge — so our rule reports them and theirs doesn't. See "What the cycles actually are" below.
On type-only imports: import-next/no-cycle hooks all ImportDeclaration nodes including import type. The detected cycles contain mixed edges — at least one value import alongside a import type return edge. See "What the cycles actually are" below for the specific file-by-file verification.
Why it shipped with the wrong default: Unit tests use small, controlled graphs — never 12 hops deep. CI stayed green. The benchmark against next.js was what surfaced it, and only because we had oxlint's count as a reference. Without an independent comparison, the silence would have looked like a clean result.
Why the subset found more than the full repo
The counterintuitive part: the 33-file subset found 5 cycles that the 14,556-file run missed.
The depth-limit bug explains it precisely. When the full-repo run processes files outside the 33-file subset first, it encounters some at hop 10 — the old depth limit. Without the cache fix, those files were incorrectly added to nonCyclicFiles:
// OLD behavior (before fix): depth-truncated nodes marked as non-cyclic
if (allCycles.length === 0) {
cache.nonCyclicFiles.add(targetFile); // ← wrong — subtree wasn't fully explored
}
Some of those falsely-marked files are intermediate nodes in cycles that pass through the 33-file subset. When the rule later encounters those cycles from files inside the subset, it hits line 975:
if (cache.nonCyclicFiles.has(targetFile)) {
return []; // ← early exit because the intermediate was wrongly marked clean
}
The DFS exits. The cycle disappears.
The 33-file subset run starts with a fresh nonCyclicFiles cache — none of the full-repo's false entries are present. Every path is traversed in full. The cycles surface.
Smaller scope → no false nonCyclicFiles entries from other traversals → cycles found. That is the exact signature of the premature-memoization bug.
Cache lifetime: nonCyclicFiles is a module-level object shared across every file processed in a single npx eslint invocation. It is not reset between files. File ordering follows ESLint's glob expansion (roughly lexical). Files earlier in the scan can poison entries for files processed later — reproducibly, not randomly.
What this means for your own cycle detector
The test that exposed our bug works on any implementation:
- Run
no-cycleon your full monorepo — note the count - Pick a known-complex directory (dependency-heavy, many cross-imports) and run on just that subtree
- If the subset finds cycles the full run doesn't, you have a cache or depth interaction affecting the broader scope
We found 5 in 33 files that were invisible in 14,556. The smaller scope, because it has a cleaner traversal state, shows you what the larger scope buried. Most teams never run this check because they assume "fewer files = fewer findings." For cycle detection with caching, the opposite can be true.
To run this on eslint-plugin-import-next@2.3.6 (which has the fix):
npm install --save-dev eslint-plugin-import-next@2.3.6
# Full monorepo
npx eslint src/ --rule '{"import-next/no-cycle": "error"}'
# Specific subdirectory (the diagnostic test)
npx eslint src/components/ --rule '{"import-next/no-cycle": "error"}'
// eslint.config.mjs — using 'import-next' namespace to distinguish from eslint-plugin-import
import importNext from 'eslint-plugin-import-next';
export default [
{
plugins: { 'import-next': importNext },
rules: {
'import-next/no-cycle': 'error',
// maxDepth defaults to Number.MAX_SAFE_INTEGER — don't lower it
// unless you understand the cache-poisoning tradeoff
},
},
];
The pattern — and what it means for any cycle detector
Unit tests on small graphs won't catch this:
- A 6-file test cycle never exercises a 10-hop depth limit
- No unit test validates "subset finds ≥ full-repo count"
The only thing that caught it: a large real-world repo measured against an independent reference tool, plus running the subset test that makes the paradox visible. If your cycle detector reports silence on a large monorepo, run it on a known-complex subdirectory. The silence might be correct. Or it might be a depth limit and a poisoned cache you didn't know you had.
What the cycles actually are
We verified the edge kinds against the next.js source. The cycle between fetch-server-response.ts and set-cache-busting-search-param.ts is a mixed cycle:
// fetch-server-response.ts — VALUE import
import { setCacheBustingSearchParam } from './set-cache-busting-search-param'
// set-cache-busting-search-param.ts — TYPE-ONLY import
import type { RequestHeaders } from './fetch-server-response'
One edge is a value import (runtime dependency), one is import type (compile-time only, erased at runtime). This is the clean explanation for the 0-vs-5 gap:
- Our rule hooks all
ImportDeclarationnodes includingimport type— so it sees the full cycle -
eslint-plugin-import/no-cyclev2.32.0 skipsimport typeedges viaimporter.importKind === 'type'(no-cycle.js line 93) — it sees the value edge fromfetch-server-response.tsbut not theimport typereturn edge, so no cycle is detected
Whether a mixed-edge cycle is "real" depends on your position. The value-import direction is a runtime dependency. The import type direction is compile-time only. We report both because circular dependencies in the source graph are an architectural concern regardless of whether every edge survives compilation. If you only care about runtime cycles, set ignoreTypeImports: true in the rule options.
Benchmark harness variance. During post-fix validation, back-to-back runs produced 218→255→301. These are total violation rows (one per file-import pair), not distinct cycles. The variance was a harness bug: pendingCycleReports accumulated across runs in our test tooling, not in production ESLint. Fixed by resetting state between runs.
Has a lint rule ever returned different counts on the same codebase across back-to-back runs — or found more issues on a subset than the full repo? What was the first thing that made you look closer?
Part of the Inside our linter benchmarks series:
← no-cycle Finds 0 Cycles in Next.js (And Other Lies Caches Tell You) | What Ground Truth Caught That Unit Tests Missed →
📦 eslint-plugin-import-next · Rule docs
GitHub | X | LinkedIn | Dev.to | ofriperetz.dev
