Best GPU for Flux in 2026: 7 Cards Compared (From $249)

From the Best GPU for AI archive. The canonical version has interactive calculators, an up-to-date GPU comparison table, and live pricing.

Quick answer: The RTX 4070 Ti Super (16GB) is the best GPU for Flux for most users. Flux needs at least 12GB VRAM to run, and 16GB gives you comfortable headroom for ControlNet and higher resolutions.

See the recommended pick on the original guide

Why Flux is more demanding than SDXL

Flux is a next-generation image model built on a flow-matching architecture that produces sharper images with better prompt adherence than SDXL. The tradeoff is higher hardware requirements across the board:

• Larger model weights — Flux Dev checkpoint is ~23GB on disk, significantly larger than SDXL's ~7GB
• Higher memory overhead — the transformer-based DiT architecture uses more activation memory during inference
• Slower per-step generation — each diffusion step takes longer compared to SDXL at identical resolution
• Less flexible quantization — FP8 helps, but Flux is more sensitive to precision reduction than SDXL

The practical result: a card that runs SDXL comfortably may struggle with Flux. You need more VRAM and a faster GPU to get usable iteration speeds. If you are still primarily running SDXL and deciding whether to upgrade for Flux, our best GPU for SDXL guide covers SDXL-specific hardware recommendations before you make the jump.

Flux Schnell vs Flux Dev — what's the difference?

Flux comes in two main variants with meaningfully different requirements:

Flux Schnell:

• Distilled model designed for fast inference
• Generates quality images in 4–8 steps (vs 20+ for Dev)
• Lower VRAM footprint — ~10GB minimum at 1024px
• Great for rapid iteration and prompt exploration
• Slightly lower quality ceiling than Dev

Flux Dev:

• Full guidance-distilled model for highest quality
• Typically run at 20–50 steps for best results
• ~12GB minimum VRAM at 1024px
• Better for final renders, fine-tuned outputs, and LoRA use
• Required for most ControlNet workflows

Practical recommendation: Use Schnell for exploration, Dev for final renders. If you're on a 12GB card, Schnell at FP8 quantization is your best bet.

VRAM requirements table

Cards with 8GB VRAM cannot run Flux at native resolution without aggressive CPU offloading — expect 5–10 minutes per image, not seconds. 12GB is the practical minimum; 16GB is where Flux actually works well. For a deeper breakdown of VRAM tiers and what each one buys you in Flux, see our how much VRAM for Flux guide.

VRAM chart available at the original article

Generation speed benchmarks

Approximate time per image at 1024×1024, 20 steps, Euler sampler in ComfyUI:

Times approximate for single-image generation. Real-world times vary by sampler, batch size, and system RAM.

The speed gap between the RTX 4060 Ti 16GB and the RTX 4070 Ti Super for Flux Dev is meaningful — 13 seconds vs 19 seconds per image adds up fast over a long creative session. When you're iterating through 50+ prompts, that's the difference between an hour and an hour and a half.

Best overall: RTX 4070 Ti Super

The RTX 4070 Ti Super remains the sweet spot for Flux in 2026:

• 16GB VRAM handles Flux Dev with ControlNet without memory pressure
• ~13 seconds per Flux Dev image is fast enough for productive iteration
• ~$700 street price is well below the RTX 5080 ($1,000) and 4090 ($1,600)
• Full ComfyUI, Forge, and SwarmUI compatibility
• Handles Flux LoRA training at batch size 1–2 (slow but functional)

If you are coming from Stable Diffusion and upgrading specifically for Flux, this is the card to buy. For Chroma-specific generation workflows built on the Flux architecture, see our best GPU for Chroma AI guide.

See the recommended pick on the original guide

Best flagship: RTX 4090

For professional workflows or heavy ControlNet stacking, the RTX 4090 gives you 24GB of VRAM and roughly 1.7x faster generation than the 4070 Ti Super:

• Handles Flux Dev + dual ControlNet + IP-Adapter simultaneously (16–20GB combined)
• Flux LoRA training with batch size 4–6 for better convergence
• High-res Flux generation at 1.5K and 2K without tiling
• Future-proof for upcoming Flux variants and heavier workflows

See the recommended pick on the original guide

Best budget: RTX 4060 Ti 16GB

At ~$400, the RTX 4060 Ti 16GB is the cheapest new card that runs Flux without constant offloading. See our RTX 4060 Ti Flux capability deep-dive for exactly what workflows fit and which hit limits:

• 16GB VRAM means Flux Dev actually fits without extreme CPU offloading tricks
• Generation runs ~19 seconds per image — slow but workable
• Good for hobbyists who generate a few dozen images per session
• Not suitable for Flux LoRA training at any meaningful batch size

See the recommended pick on the original guide

Flux LoRA training: VRAM requirements

Training custom Flux LoRAs is a different workload than inference. VRAM needs scale with batch size:

Flux LoRA training on 16GB is technically possible with batch size 1 and FP8 base weights, but it's painfully slow and requires careful gradient accumulation. 24GB is the practical minimum for useful Flux LoRA training. For training-specific GPU recommendations beyond Flux, our best GPU for LoRA training guide covers SDXL, SD 1.5, and Flux LoRA workflows in detail.

ComfyUI optimization tips for Flux

These settings significantly improve Flux performance in ComfyUI:

• FP8 checkpoint quantization — load Flux in FP8 instead of FP16 to save ~25% VRAM with minimal quality loss. Essential for 12–14GB cards. For a deeper look at precision trade-offs, see our best quantization for Stable Diffusion guide.
• Use Flux Schnell for iteration — 4–8 steps instead of 20+ cuts time by 60% during prompt exploration
• Keep ControlNet preprocessors unloaded when not actively using them (ComfyUI node setting)
• Enable model unloading between generations if VRAM is tight
• TAESD VAE instead of full VAE for preview images — much lower VRAM overhead
• Close Chrome and other GPU-using apps — Flux uses nearly all available VRAM and even browser GPU acceleration competes

If you're coming from ComfyUI workflows with SDXL, note that Flux requires specific nodes (ComfyUI-FluxGuidance, etc.) and the workflow setup is different. If you are also weighing whether to use ComfyUI or Automatic1111 for Flux, our Automatic1111 vs ComfyUI comparison explains which frontend handles Flux VRAM more efficiently.

Not ready to buy hardware? Try cloud GPU first

Renting a GPU to test Flux workflows before buying is smart. RunPod offers RTX 4090 instances for ~$0.50/hr — enough to run an entire Flux session before committing $700+.

Which GPU should YOU buy for Flux?

• You generate Flux images casually (a few dozen per session, no ControlNet): The RTX 4060 Ti 16GB at $400 runs Flux Dev without offloading. Generation is slow at ~19s but the model fits and the price is right.
• You generate frequently and want fast iteration: The RTX 4070 Ti Super at ~$700 is the sweet spot. 16GB handles all Flux workflows, and 13s per image is fast enough for creative work.
• You use Flux with ControlNet, IP-Adapter, or multiple LoRAs stacked: You need 24GB. The RTX 4090 prevents out-of-memory errors when combining multiple control modules.
• You train custom Flux LoRAs: 16GB works only at batch size 1 with FP8 quantization — slow and limiting. The RTX 4090 at 24GB makes Flux LoRA training practical. The RTX 5090 at 32GB makes it comfortable.
• You want maximum future-proofing: RTX 5090 at 32GB handles every current and near-future Flux variant, including multi-ControlNet at 2K resolution.

Common mistakes to avoid

1. Buying an 8GB GPU expecting it to run Flux. Flux cannot run at native resolution on 8GB without CPU offloading that takes 5–10 minutes per image. 12GB is the real minimum, 16GB is recommended.
2. Using Flux Dev for every generation. Flux Schnell produces excellent results in 4–8 steps using a fraction of the generation time. Use Schnell for iteration and Dev for final outputs.
3. Skipping FP8 quantization on 12–14GB cards. FP8 cuts VRAM usage by ~25% with minimal quality loss. On a 12GB card, this is the difference between Flux fitting or not.
4. Expecting AMD GPUs to work well with Flux. The Flux ecosystem's optimized ComfyUI nodes and ControlNet extensions are built around NVIDIA CUDA. AMD ROCm support is inconsistent.

Final verdict

See the recommended pick on the original guide

For most Flux users, buy the RTX 4070 Ti Super. Only step up to the 4090 if you need training capability, dual ControlNet stacking, or production-level throughput.

Flux is a VRAM-first workload — buy the most VRAM you can afford, then worry about speed.

Related guides on Best GPU for AI

• How Much VRAM Do You Need for Flux? (2026 Guide)
• Best GPU for AI Art in 2026: Every Budget Compared
• Best GPU for AI Code Generation in 2026 (5 Picks Ranked)

Continue on Best GPU for AI for the complete guide with interactive calculators and current GPU prices.